Have you ever experienced Canon Printer error b200 on yourCanon Pixma printer? Looking for the causes of the error message? Want to get astep-by-step guide to resolve Canon Printer error b200? It is veryfrustrating and disappointing when you get an error message during printing adocument. Well now, you do not need to be worry! Here, you get thetroubleshooting tips that you need to follow to resolve Canon Printer error b200. 

Canon printers are known for their ultimate performance all overthe world. If you have a Canon inkjet printer then there are chances that yourdevice shows Canon Printer error b200 at some point. It is mainly caused due toproblems with the voltage, print head, or temperature. Canon Printer error b200indicates the catastrophic error with your Canon printer. 

 Steps to Resolve Canon Printer error b200 

There are several things that you can do to fix the printheadissues and resolve the Canon Printer error b200. Follow the below steps to fixCanon Printer error b200 before replacing your entire device: 

Reset your     Canon printer. For this, you need to unplug your device and leave it     disconnected for about half an hour. A long reset of your printer allows     it to cool down and restore everything to the appropriate position before     turning on the device.

• Eliminate all the obstructions.     There may be a possibility that something is disrupting the connection of     the printer head. For this, you have to open the printer door and     disconnect the printer head and place it again after some time.
• Clean the print head of your     printer manually. For this, you can use pure alcohol or non-oil-based     cleaner. To clean the printer, use a microfiber cloth. Rub it gently onto     the contacts. Establish the connection again once it dries.
• Clean the printer head by using     the maintenance options of the device. It is very useful when the printer     head is blocked.
• Try to re-install your printer     drivers and software by following the instructions from the official Canon     support page.
• Change the old ink. If the ink     is stored for a long time in the ink cartridge of the printer, then it     becomes hardened inside the print head. In that case, you can also run it     under hot water until clean water comes from it. Dry it with a paper towel     and insert the print head again into your printer.
• Turn off the printer and verify     the working of the power cord and other things attached with the printer.     Disconnect the USB cable, power cable from the printer and reconnect the     printer to the USB port and plug it again.
• Change the new ink cartridge if     there is any fault in it as faulty ink cartridge triggers Canon Printer     error b200.
• If after following the above steps, you again face the     Canon Printer error b200 issue then it means that you need to change your     entire printer. 
• Hopefully, the above-mentioned steps will help you in fixing the CanonPrinter error b200 issue. If after following these steps, you are not ableto resolve Canon Printer error b200 then there is a possibility that there isdamage within your printer interior.